Double Skin Partitions

Our double skin steel partition system offers a wide variety of panel options including all solid, half solid/half glass, and mid, part or full glazed.

Double skin steel partitions are designed with a smooth finish to both sides making it ideal for clean room or office applications. It also provides good sound proofing qualities when these are required.

Our steel partitions our suitable for a wide range of applications ranging from creating freestanding offices to providing clean rooms and storage areas for food or chemicals.

Our single skin steel partitions consist of prefabricated panels which slot together inside a “H” post for quick and easy installation. We manufacture standard size panels – normally 1.0m wide by either 2.4m, 2,7m or 3.0m high – or we can manufacture any size or shape.

All panels are electrostatically powder coated in 4 standard colours or any other colour required at a slight extra cost. The standard colours are:

Light Grey 00 A 05
Mid Grey 10 A 07
Sandstone 08 B 17
Stone 10 B 17

Technical Information

Panels are constructed from 25.4 x 42 x 25.4 x 1.2mm cold rolled channels panelled both sides with 0 8mm (21g) CR4 mild steel sheet with 30mm Rockwool mineral fibre infill and are joined together using an ‘H’ section, making the installation very similar to the installation of composite part systems. Panels are available in solid, half-glazed, solid/glazed/solid or borrowed light elevation.

Standard Panel Sizes

Height 2400, 2700, 3000mm
Width 1000mm
Dado Height 1200mm
Thickness 47mm
A range of infill and special size panels can be supplied to maintain final dimensions.

Mullion Sizes

50 x 50 x 2.0mm – up to 2700mm
80 40 x 2.5mm – 2700mm and above
100 x 50 x 3.0mm -to suit installation
All two-way intermediate mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength. e.g. on clear access doors.

Standard Door Module Sizes – Steel or Timber

Side Hung Doors height 2022mm width 900mm
Double Doors height 2022mm width 1740mm
Sliding Doors to suit customer requirements
Doors can be supplied with or without vision panels.
A full range of non standard door types, i.e. full height leaves, clear access modules or hospital type leaves are available to order.


Glass is mounted on foam strip and held in place by steel glazing beads, 6mm toughened, 6.4mm laminated and 6mm Pyroshield are supplied as standard. However other types of glass and Perspex may also be fitted as required. Double glazed panels may be supplied using 6mm toughened to outer face and 4mm toughened to the inside face, fitted into a plastic two-piece double glazing section.

Paint Finish

All panels are electrostatically powder coated in the following standard colours:-
Grey 10 A 07, Grey 00 A 05, Sandstone 08 B17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.


A comprehensive range of accessories including drop-down and sliding hatches, louvers, vents and locking systems are available to order.

Get in touch

Need any more information about any of our products or services? Feel free to contact us and we will be happy to help you in any way possible. Use the methods below or using the form on our contact page.