Single Skin Partitions

Our single skin steel partition system offers a wide variety of panel options including all solid, all mesh, half solid or half mesh, half solid or half glass, mid-glazed or mesh and top glazed or mesh – just about any combination you can think of!

Single skin steel partitions are designed to keep costs to a minimum and therefore offer an extremely cost effective solution for separating work or storage areas.

Our steel partitions our suitable for a wide range of applications ranging from dividing up existing factory or production areas to creating freestanding offices in a warehouse or production environment or providing secure storage areas.

Our single skin steel partitions consist of prefabricated panels which are bolted together for quick and easy installation. We manufacture standard size panels – normally 1.0m wide by either 2.4m, 2,7m or 3.0m high – or we can manufacture any size or shape.

All panels are electrostatically powder coated in 4 standard colours or any other colour required at a slight extra cost. The standard colours are:

Light Grey 00 A 05
Mid Grey 10 A 07
Sandstone 08 B 17
Stone 10 B 17

Technical Information

Panels are constructed from 43 x 43 x 1.2mm (18g) cold rolled angles and 32 x 32 x 0.7mm (22g) cold rolled tee bars with 0.8mm (21g) CR4 mild steel or 50 x 50 x 3mm (10g) weldmesh sheets spot welded into the framework.

Standard Panel Sizes

Height 2400, 2700, 3000mm
Width 1000mm
Dado Height 1200mm
Thickness 43mm
A range of infill and special size panels can be supplied to maintained final dimensions.

Mullion Sizes

50 x 50 x 2.0mm – up to 2700mm high
80 x 40 x 2.5mm – 2700mm and above
100 x 50 x 3.0mm – to suit installation
All two-way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength e.g. on clear access doors.

Standard Door Module Sizes – Steel or Timber

Side Hung Doors height 2022mm width 1000mm
Double Door height 2022mm width 1940mm
Sliding Doors to suit customer requirements
Doors can be supplied with or without vision panels. A full range of non standard door types, i.e. full height leaves; clear access modules or hospital type leaves are available to order.

Glazing

A two piece plastic glazing system that can accommodate 4mm to 7mm glass, is supplied in 1828 and 2440mm lengths to be cut and fitted on site. 6mm toughened, 6.4mm laminated and 6mm Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.

Paint Finish

All panels are electrostatically powder coated in the following standard colours: Grey 10 A 07 Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.

Accessories

A comprehensive range of accessories, including drop-down and sliding hatches louvers, vents and locking systems are available to order.

Get in touch

Need any more information about any of our products or services? Feel free to contact us and we will be happy to help you in any way possible. Use the methods below or using the form on our contact page.